Building the Xenotyrannus Rex Armature, Part 1

-
The up to date process with some written descriptions of my Xenotyrannus armature.
  Rex armature blueprints

 1cm 3mm double joint

  1cm 3mm double joint

 Experimental foot and toe mech

 Rex armature under construction

 Rex armature under construction

 successful fabrication of one of the Rex's feet

One of the 3mm rex arms, this is cannibalizing one of the smaller hand paddles that was originally on the 2015 incarnation of the X-Rex armature.

 Rex armature under construction

 Rex armature cleaned and ready for the Manchester Animation Festival





Tackling the issue of turning the original 2015 sculpt of the Rex skull into a much smaller variant for the newer armature. I'll be using a photographic process that captures up to 50 photos from around the object to create a 3D model for 3D printing.


 new skull has been delivered and is now ready to undergo molding and resculpting.

 Nearly there, now I just need to make the fingers.




Comments

Post a Comment

Popular posts from this blog

Armatures.. the things to know and what to avoid!

-
Image
I've been studying stop motion armatures now for over 10 years, 3 of those years has been actually fabricating them with Animation Toolkit on Chuck Steel: Night of the Trampires , and at Telegael studios on  Morten and the Spider Queen and Project 390 . What I have learned, both historically and technically would be of great interest to future students in stop-motion. I know what your thinking, you take one look at a ball & socket armature and think "this is way to hard to do, its so complicated", well, I once thought exactly the same when I started my animation path back in 2002. The trick is learning how to use it right, ball & socket armature kits are like a steel equivalent to Lego construction kits, you have many tiny pieces that when assembled create a final item, in this case a armature, so understanding the mechanics of biological joints and translating that movement into a engineering solution. Wire is simply understanding how the wire and which wir...
Read more

Mould making...Here's one way the industry do it.

-
Image
Until recently, my only knowledge on mould making was basic, rules such as not having undercuts to allow easy removal of a casting and using mold release. I also only had material experience with plaster and silicone, I was aware of fibreglass mould's, but I had never used it on any job or hobby project to date. I have recently discovered a material that the industry also use whilst I was employed at Telegael in Ireland, which is called Aluminium Resin (I refer to it as Alucast for short). It's stronger than plaster, but just as light as polyresin, it's virtually odorless, it can be sanded with a file or a belt sander, each casting cures in about 30-60 minutes and it can be used for silicone and foam latex casting. If you're working at home making your own stop-motion film, you can make your mold's in whatever fashion and material feels comfortable for you; However, if you are looking to work in the industry, they expect a level of skill that demonstrates...
Read more

The build-up method, or foam fabrication to you new puppet makers!

-
Image
For years I have wanted to have a second stab at the build-up method for making my stop-motion puppets, back in 2012, Ray Harryhausen told me my build up technique was wonderfully done, but I could see the flaws in my work even back them, the second time round, I wanted to be a little more careful with it, but not take to long in making it. One big help to me was a book by my friend Richard Svensson "My Stop-Motion Monster Puppet Menagerie" which the opening of the book tells readers how he make build-up puppets. His level of puppet making is a true skill to behold, you can find his work, along with how to videos on his YouTube channel Bluworm . This was a better insight for me into making my newer puppets, where as previously I was making my puppets on pure guess work. Though I did not have time to make my puppets as detailed as his, it was nice to see what could be achieved from his photos had I the time to learn how to make them. I started with the Xenotyranuus ...
Read more